For a better version of the sf vignettes see https://r-spatial.github.io/sf/articles/
Simple features or simple feature access refers to a formal standard (ISO 19125-1:2004) that describes how objects in the real world can be represented in computers, with emphasis on the spatial geometry of these objects. It also describes how such objects can be stored in and retrieved from databases, and which geometrical operations should be defined for them.
The standard is widely implemented in spatial databases (such as PostGIS), commercial GIS (e.g., ESRI ArcGIS) and forms the vector data basis for libraries such as GDAL. A subset of simple features forms the GeoJSON standard.
R has well-supported classes for storing spatial data (sp) and interfacing to the above mentioned environments (rgdal, rgeos), but has so far lacked a complete implementation of simple features, making conversions at times convoluted, inefficient or incomplete. The package sf tries to fill this gap, and aims at succeeding sp in the long term.
A feature is thought of as a thing, or an object in the real world, such as a building or a tree. As is the case with objects, they often consist of other objects. This is the case with features too: a set of features can form a single feature. A forest stand can be a feature, a forest can be a feature, a city can be a feature. A satellite image pixel can be a feature, a complete image can be a feature too.
Features have a geometry describing where on Earth the feature is located, and they have attributes, which describe other properties. The geometry of a tree can be the delineation of its crown, of its stem, or the point indicating its centre. Other properties may include its height, color, diameter at breast height at a particular date, and so on.
The standard says: “A simple feature is defined by the OpenGIS Abstract specification to have both spatial and non-spatial attributes. Spatial attributes are geometry valued, and simple features are based on 2D geometry with linear interpolation between vertices.” We will see soon that the same standard will extend its coverage beyond 2D and beyond linear interpolation. Here, we take simple features as the data structures and operations described in the standard.
All geometries are composed of points. Points are coordinates in a 2-, 3- or 4-dimensional space. All points in a geometry have the same dimensionality. In addition to X and Y coordinates, there are two optional additional dimensions:
The four possible cases then are:
The following seven simple feature types are the most common, and are for instance the only ones used for GeoJSON:
||zero-dimensional geometry containing a single point|
||sequence of points connected by straight, non-self intersecting line pieces; one-dimensional geometry|
||geometry with a positive area (two-dimensional); sequence of points form a closed, non-self intersecting ring; the first ring denotes the exterior ring, zero or more subsequent rings denote holes in this exterior ring|
||set of points; a MULTIPOINT is simple if no two Points in the MULTIPOINT are equal|
||set of linestrings|
||set of polygons|
||set of geometries of any type except GEOMETRYCOLLECTION|
Each of the geometry types can also be a (typed) empty set, containing zero coordinates (for
POINT the standard is not clear how to represent the empty geometry). Empty geometries can be thought of being the analogue to missing (
NA) attributes, NULL values or empty lists.
The remaining geometries 10 are rarer, but increasingly find implementations:
||The CIRCULARSTRING is the basic curve type, similar to a LINESTRING in the linear world. A single segment requires three points, the start and end points (first and third) and any other point on the arc. The exception to this is for a closed circle, where the start and end points are the same. In this case the second point MUST be the center of the arc, i.e., the opposite side of the circle. To chain arcs together, the last point of the previous arc becomes the first point of the next arc, just like in LINESTRING. This means that a valid circular string must have an odd number of points greater than 1.|
||A compound curve is a single, continuous curve that has both curved (circular) segments and linear segments. That means that in addition to having well-formed components, the end point of every component (except the last) must be coincident with the start point of the following component.|
||Example compound curve in a curve polygon: CURVEPOLYGON(COMPOUNDCURVE(CIRCULARSTRING(0 0,2 0, 2 1, 2 3, 4 3),(4 3, 4 5, 1 4, 0 0)), CIRCULARSTRING(1.7 1, 1.4 0.4, 1.6 0.4, 1.6 0.5, 1.7 1) )|
||A MultiCurve is a 1-dimensional GeometryCollection whose elements are Curves, it can include linear strings, circular strings or compound strings.|
||A MultiSurface is a 2-dimensional GeometryCollection whose elements are Surfaces, all using coordinates from the same coordinate reference system.|
||A Curve is a 1-dimensional geometric object usually stored as a sequence of Points, with the subtype of Curve specifying the form of the interpolation between Points|
||A Surface is a 2-dimensional geometric object|
||A PolyhedralSurface is a contiguous collection of polygons, which share common boundary segments|
||A TIN (triangulated irregular network) is a PolyhedralSurface consisting only of Triangle patches.|
||A Triangle is a polygon with 3 distinct, non-collinear vertices and no interior boundary|
Coordinates can only be placed on the Earth’s surface when their coordinate reference system (CRS) is known; this may be a spheroid CRS such as WGS84, a projected, two-dimensional (Cartesian) CRS such as a UTM zone or Web Mercator, or a CRS in three-dimensions, or including time. Similarly, M-coordinates need an attribute reference system, e.g. a measurement unit.
sf represents simple features as native R objects. Similar to PostGIS, all functions and methods in
sf that operate on spatial data are prefixed by
st_, which refers to spatial type; this makes them easily findable by command-line completion. Simple features are implemented as R native data, using simple data structures (S3 classes, lists, matrix, vector). Typical use involves reading, manipulating and writing of sets of features, with attributes and geometries.
As attributes are typically stored in
data.frame objects (or the very similar
tbl_df), we will also store feature geometries in a
data.frame column. Since geometries are not single-valued, they are put in a list-column, a list of length equal to the number of records in the
data.frame, with each list element holding the simple feature geometry of that feature. The three classes used to represent simple features are:
sf, the table (
data.frame) with feature attributes and feature geometries, which contains
sfc, the list-column with the geometries for each feature (record), which is composed of
sfg, the feature geometry of an individual simple feature.
We will now discuss each of these three classes.
As we usually do not work with geometries of single simple features, but with datasets consisting of sets of features with attributes, the two are put together in
sf (simple feature) objects. The following command reads the
nc dataset from a file that is contained in the
library(sf) ## Linking to GEOS 3.9.0, GDAL 3.2.1, PROJ 7.2.1 nc <- st_read(system.file("shape/nc.shp", package="sf")) ## Reading layer `nc' from data source ## `/tmp/RtmpYZf9Mh/Rinst6f5476aaf80e/sf/shape/nc.shp' using driver `ESRI Shapefile' ## Simple feature collection with 100 features and 14 fields ## Geometry type: MULTIPOLYGON ## Dimension: XY ## Bounding box: xmin: -84.32385 ymin: 33.88199 xmax: -75.45698 ymax: 36.58965 ## Geodetic CRS: NAD27
(Note that users will not use
system.file but give a
filename directly, and that shapefiles consist of more than one file, all with identical basename, which reside in the same directory.) The short report printed gives the file name, the driver (ESRI Shapefile), mentions that there are 100 features (records, represented as rows) and 14 fields (attributes, represented as columns). This object is of class
meaning it extends (and “is” a)
data.frame, but with a single list-column with geometries, which is held in the column with name
If we print the first three features, we see their attribute values and an abridged version of the geometry
which would give the following output:
In the output we see:
data.framerow, consisting of attributes and geometry
sfc, which is a column in the
sf objects are
methods(class = "sf") ##  $<- [ [[<- ##  aggregate as.data.frame cbind ##  coerce dbDataType dbWriteTable ##  filter identify initialize ##  merge plot print ##  rbind show slotsFromS3 ##  st_agr st_agr<- st_area ##  st_as_s2 st_as_sf st_bbox ##  st_boundary st_buffer st_cast ##  st_centroid st_collection_extract st_convex_hull ##  st_coordinates st_crop st_crs ##  st_crs<- st_difference st_filter ##  st_geometry st_geometry<- st_inscribed_circle ##  st_interpolate_aw st_intersection st_intersects ##  st_is st_is_valid st_join ##  st_line_merge st_m_range st_make_valid ##  st_nearest_points st_node st_normalize ##  st_point_on_surface st_polygonize st_precision ##  st_reverse st_sample st_segmentize ##  st_set_precision st_shift_longitude st_simplify ##  st_snap st_sym_difference st_transform ##  st_triangulate st_union st_voronoi ##  st_wrap_dateline st_write st_z_range ##  st_zm transform ## see '?methods' for accessing help and source code
It is also possible to create
data.frame objects with geometry list-columns that are not of class
sf, e.g. by
However, such objects:
The column in the
sf data.frame that contains the geometries is a list, of class
sfc. We can retrieve the geometry list-column in this case by
nc[], but the more general way uses
(nc_geom <- st_geometry(nc)) ## Geometry set for 100 features ## Geometry type: MULTIPOLYGON ## Dimension: XY ## Bounding box: xmin: -84.32385 ymin: 33.88199 xmax: -75.45698 ymax: 36.58965 ## Geodetic CRS: NAD27 ## First 5 geometries: ## MULTIPOLYGON (((-81.47276 36.23436, -81.54084 3... ## MULTIPOLYGON (((-81.23989 36.36536, -81.24069 3... ## MULTIPOLYGON (((-80.45634 36.24256, -80.47639 3... ## MULTIPOLYGON (((-76.00897 36.3196, -76.01735 36... ## MULTIPOLYGON (((-77.21767 36.24098, -77.23461 3...
Geometries are printed in abbreviated form, but we can view a complete geometry by selecting it, e.g. the first one by
nc_geom[] ## MULTIPOLYGON (((-81.47276 36.23436, -81.54084 36.27251, -81.56198 36.27359, -81.63306 36.34069, -81.74107 36.39178, -81.69828 36.47178, -81.7028 36.51934, -81.67 36.58965, -81.3453 36.57286, -81.34754 36.53791, -81.32478 36.51368, -81.31332 36.4807, -81.26624 36.43721, -81.26284 36.40504, -81.24069 36.37942, -81.23989 36.36536, -81.26424 36.35241, -81.32899 36.3635, -81.36137 36.35316, -81.36569 36.33905, -81.35413 36.29972, -81.36745 36.2787, -81.40639 36.28505, -81.41233 36.26729, -81.43104 36.26072, -81.45289 36.23959, -81.47276 36.23436)))
The way this is printed is called well-known text, and is part of the standards. The word
MULTIPOLYGON is followed by three parentheses, because it can consist of multiple polygons, in the form of
POL1 might consist of an exterior ring and zero or more interior rings, as of
(EXT1,HOLE1,HOLE2). Sets of coordinates are held together with parentheses, so we get
crds_ is a comma-separated set of coordinates of a ring. This leads to the case above, where
MULTIPOLYGON(((crds_ext))) refers to the exterior ring (1), without holes (2), of the first polygon (3) - hence three parentheses.
We can see there is a single polygon with no rings:
but some of the polygons in this dataset have multiple exterior rings; they can be identified by
MULTIPOLYGON datastructure, in R we have a list of lists of lists of matrices. For instance, we get the first 3 coordinate pairs of the second exterior ring (first ring is always exterior) for the geometry of feature 4 by
Geometry columns have their own class,
Methods for geometry list-columns include
methods(class = 'sfc') ##  Ops [ [<- ##  as.data.frame c coerce ##  format identify initialize ##  print rep show ##  slotsFromS3 st_area st_as_binary ##  st_as_grob st_as_s2 st_as_sf ##  st_as_text st_bbox st_boundary ##  st_buffer st_cast st_centroid ##  st_collection_extract st_convex_hull st_coordinates ##  st_crop st_crs st_crs<- ##  st_difference st_geometry st_inscribed_circle ##  st_intersection st_intersects st_is ##  st_is_valid st_line_merge st_m_range ##  st_make_valid st_nearest_points st_node ##  st_normalize st_point_on_surface st_polygonize ##  st_precision st_reverse st_sample ##  st_segmentize st_set_precision st_shift_longitude ##  st_simplify st_snap st_sym_difference ##  st_transform st_triangulate st_union ##  st_voronoi st_wrap_dateline st_write ##  st_z_range st_zm str ##  summary vec_cast.sfc vec_ptype2.sfc ## see '?methods' for accessing help and source code
Coordinate reference systems (
st_transform) are discussed in the section on coordinate reference systems.
st_as_text convert geometry list-columns into well-known-binary or well-known-text, explained below.
st_bbox retrieves the coordinate bounding box.
attributes(nc_geom) ## $n_empty ##  0 ## ## $crs ## Coordinate Reference System: ## User input: NAD27 ## wkt: ## GEOGCRS["NAD27", ## DATUM["North American Datum 1927", ## ELLIPSOID["Clarke 1866",6378206.4,294.978698213898, ## LENGTHUNIT["metre",1]]], ## PRIMEM["Greenwich",0, ## ANGLEUNIT["degree",0.0174532925199433]], ## CS[ellipsoidal,2], ## AXIS["latitude",north, ## ORDER, ## ANGLEUNIT["degree",0.0174532925199433]], ## AXIS["longitude",east, ## ORDER, ## ANGLEUNIT["degree",0.0174532925199433]], ## ID["EPSG",4267]] ## ## $class ##  "sfc_MULTIPOLYGON" "sfc" ## ## $precision ##  0 ## ## $bbox ## xmin ymin xmax ymax ## -84.32385 33.88199 -75.45698 36.58965
The class of
sfc is shared with all geometry types, and
TYPE indicating the type of the particular geometry at hand.
There are two “special” types:
GEOMETRYCOLLECTION indicates that each of the geometries may contain a mix of geometry types, as in
(mix <- st_sfc(st_geometrycollection(list(st_point(1:2))), st_geometrycollection(list(st_linestring(matrix(1:4,2)))))) ## Geometry set for 2 features ## Geometry type: GEOMETRYCOLLECTION ## Dimension: XY ## Bounding box: xmin: 1 ymin: 2 xmax: 2 ymax: 4 ## CRS: NA ## GEOMETRYCOLLECTION (POINT (1 2)) ## GEOMETRYCOLLECTION (LINESTRING (1 3, 2 4)) class(mix) ##  "sfc_GEOMETRYCOLLECTION" "sfc"
Still, the geometries are here of a single type.
GEOMETRY, indicates that the geometries in the geometry list-column are of varying type:
These two are fundamentally different:
GEOMETRY is a superclass without instances,
GEOMETRYCOLLECTION is a geometry instance.
GEOMETRY list-columns occur when we read in a data source with a mix of geometry types.
GEOMETRYCOLLECTION is a single feature’s geometry: the intersection of two feature polygons may consist of points, lines and polygons, see the example below.
Simple feature geometry (
sfg) objects carry the geometry for a single feature, e.g. a point, linestring or polygon.
Simple feature geometries are implemented as R native data, using the following rules
matrix, each row containing a point
Creator functions are rarely used in practice, since we typically bulk read and write spatial data. They are useful for illustration:
(x <- st_point(c(1,2))) ## POINT (1 2) str(x) ## 'XY' num [1:2] 1 2 (x <- st_point(c(1,2,3))) ## POINT Z (1 2 3) str(x) ## 'XYZ' num [1:3] 1 2 3 (x <- st_point(c(1,2,3), "XYM")) ## POINT M (1 2 3) str(x) ## 'XYM' num [1:3] 1 2 3 (x <- st_point(c(1,2,3,4))) ## POINT ZM (1 2 3 4) str(x) ## 'XYZM' num [1:4] 1 2 3 4 st_zm(x, drop = TRUE, what = "ZM") ## POINT (1 2)
This means that we can represent 2-, 3- or 4-dimensional coordinates. All geometry objects inherit from
sfg (simple feature geometry), but also have a type (e.g.
POINT), and a dimension (e.g.
XYM) class name. A figure illustrates six of the seven most common types.
With the exception of the
POINT which has a single point as geometry, the remaining six common single simple feature geometry types that correspond to single features (single records, or rows in a
data.frame) are created like this
p <- rbind(c(3.2,4), c(3,4.6), c(3.8,4.4), c(3.5,3.8), c(3.4,3.6), c(3.9,4.5)) (mp <- st_multipoint(p)) ## MULTIPOINT ((3.2 4), (3 4.6), (3.8 4.4), (3.5 3.8), (3.4 3.6), (3.9 4.5)) s1 <- rbind(c(0,3),c(0,4),c(1,5),c(2,5)) (ls <- st_linestring(s1)) ## LINESTRING (0 3, 0 4, 1 5, 2 5) s2 <- rbind(c(0.2,3), c(0.2,4), c(1,4.8), c(2,4.8)) s3 <- rbind(c(0,4.4), c(0.6,5)) (mls <- st_multilinestring(list(s1,s2,s3))) ## MULTILINESTRING ((0 3, 0 4, 1 5, 2 5), (0.2 3, 0.2 4, 1 4.8, 2 4.8), (0 4.4, 0.6 5)) p1 <- rbind(c(0,0), c(1,0), c(3,2), c(2,4), c(1,4), c(0,0)) p2 <- rbind(c(1,1), c(1,2), c(2,2), c(1,1)) pol <-st_polygon(list(p1,p2)) p3 <- rbind(c(3,0), c(4,0), c(4,1), c(3,1), c(3,0)) p4 <- rbind(c(3.3,0.3), c(3.8,0.3), c(3.8,0.8), c(3.3,0.8), c(3.3,0.3))[5:1,] p5 <- rbind(c(3,3), c(4,2), c(4,3), c(3,3)) (mpol <- st_multipolygon(list(list(p1,p2), list(p3,p4), list(p5)))) ## MULTIPOLYGON (((0 0, 1 0, 3 2, 2 4, 1 4, 0 0), (1 1, 1 2, 2 2, 1 1)), ((3 0, 4 0, 4 1, 3 1, 3 0), (3.3 0.3, 3.3 0.8, 3.8 0.8, 3.8 0.3, 3.3 0.3)), ((3 3, 4 2, 4 3, 3 3))) (gc <- st_geometrycollection(list(mp, mpol, ls))) ## GEOMETRYCOLLECTION (MULTIPOINT ((3.2 4), (3 4.6), (3.8 4.4), (3.5 3.8), (3.4 3.6), (3.9 4.5)), MULTIPOLYGON (((0 0, 1 0, 3 2, 2 4, 1 4, 0 0), (1 1, 1 2, 2 2, 1 1)), ((3 0, 4 0, 4 1, 3 1, 3 0), (3.3 0.3, 3.3 0.8, 3.8 0.8, 3.8 0.3, 3.3 0.3)), ((3 3, 4 2, 4 3, 3 3))), LINESTRING (0 3, 0 4, 1 5, 2 5))
The objects created are shown here:
Geometries can also be empty, as in
Well-known text (WKT) and well-known binary (WKB) are two encodings for simple feature geometries. Well-known text, e.g. seen in
(but without the leading
##  and quotes), is human-readable. Coordinates are usually floating point numbers, and moving large amounts of information as text is slow and imprecise. For that reason, we use well-known binary (WKB) encoding
st_as_binary(x) ##  01 02 00 00 00 05 00 00 00 00 00 00 00 00 00 24 40 00 00 00 00 00 00 14 40 ##  00 00 00 00 00 00 22 40 00 00 00 00 00 00 10 40 00 00 00 00 00 00 20 40 00 ##  00 00 00 00 00 08 40 00 00 00 00 00 00 1c 40 00 00 00 00 00 00 00 40 00 00 ##  00 00 00 00 18 40 00 00 00 00 00 00 f0 3f
WKT and WKB can both be transformed back into R native objects by
GDAL, GEOS, spatial databases and GIS read and write WKB which is fast and precise. Conversion between R native objects and WKB is done by package
sf in compiled (C++/Rcpp) code, making this a reusable and fast route for I/O of simple feature geometries in R.
One of the attributes of a geometry list-column (
sfc) is the
precision: a double number that, when non-zero, causes some rounding during conversion to WKB, which might help certain geometrical operations succeed that would otherwise fail due to floating point representation. The model is that of GEOS, which copies from the Java Topology Suite (JTS), and works like this:
For the precision model, see also here, where it is written that: “… to specify 3 decimal places of precision, use a scale factor of 1000. To specify -3 decimal places of precision (i.e. rounding to the nearest 1000), use a scale factor of 0.001.” Note that all coordinates, so also
M values (if present) are affected. Choosing values for
precision may require some experimenting.
As we’ve seen above, reading spatial data from an external file can be done by
filename <- system.file("shape/nc.shp", package="sf") nc <- st_read(filename) ## Reading layer `nc' from data source ## `/tmp/RtmpYZf9Mh/Rinst6f5476aaf80e/sf/shape/nc.shp' using driver `ESRI Shapefile' ## Simple feature collection with 100 features and 14 fields ## Geometry type: MULTIPOLYGON ## Dimension: XY ## Bounding box: xmin: -84.32385 ymin: 33.88199 xmax: -75.45698 ymax: 36.58965 ## Geodetic CRS: NAD27
we can suppress the output by adding argument
quiet=TRUE or by using the otherwise nearly identical but more quiet
Writing takes place in the same fashion, using
If we repeat this, we get an error message that the file already exists, and we can overwrite by
or its quiet alternative that does this by default,
layer arguments to
st_write denote a data source name and optionally a layer name. Their exact interpretation as well as the options they support vary per driver, the GDAL driver documentation is best consulted for this. For instance, a PostGIS table in database
postgis might be read by
PG: string indicates this concerns the PostGIS driver, followed by database name, and possibly port and user credentials. When the
driver arguments are not specified,
st_read tries to guess them from the datasource, or else simply reads the first layer, giving a warning in case there are more.
st_read typically reads the coordinate reference system as
proj4string, but not the EPSG (SRID). GDAL cannot retrieve SRID (EPSG code) from
proj4string strings, and, when needed, it has to be set by the user. See also the section on coordinate reference systems.
st_drivers() returns a
data.frame listing available drivers, and their metadata: names, whether a driver can write, and whether it is a raster and/or vector driver. All drivers can read. Reading of some common data formats is illustrated below:
st_layers(dsn) lists the layers present in data source
dsn, and gives the number of fields, features and geometry type for each layer:
st_layers(system.file("osm/overpass.osm", package="sf")) ## Driver: OSM ## Available layers: ## layer_name geometry_type features fields ## 1 points Point NA 10 ## 2 lines Line String NA 9 ## 3 multilinestrings Multi Line String NA 4 ## 4 multipolygons Multi Polygon NA 25 ## 5 other_relations Geometry Collection NA 4
we see that in this case, the number of features is
NA because for this xml file the whole file needs to be read, which may be costly for large files. We can force counting by
Sys.setenv(OSM_USE_CUSTOM_INDEXING="NO") st_layers(system.file("osm/overpass.osm", package="sf"), do_count = TRUE) ## Driver: OSM ## Available layers: ## layer_name geometry_type features fields ## 1 points Point 1 10 ## 2 lines Line String 0 9 ## 3 multilinestrings Multi Line String 0 4 ## 4 multipolygons Multi Polygon 13 25 ## 5 other_relations Geometry Collection 0 4
Another example of reading kml and kmz files is:
# Download .shp data u_shp <- "http://coagisweb.cabq.gov/datadownload/biketrails.zip" download.file(u_shp, "biketrails.zip") unzip("biketrails.zip") u_kmz <- "http://coagisweb.cabq.gov/datadownload/BikePaths.kmz" download.file(u_kmz, "BikePaths.kmz") # Read file formats biketrails_shp <- st_read("biketrails.shp") if(Sys.info() == "Linux") # may not work if not Linux biketrails_kmz <- st_read("BikePaths.kmz") u_kml = "http://www.northeastraces.com/oxonraces.com/nearme/safe/6.kml" download.file(u_kml, "bikeraces.kml") bikraces <- st_read("bikeraces.kml")
GDAL provides the crud (create, read, update, delete) functions to persistent storage.
read_sf) are used for reading.
write_sf) creates, and has the following arguments to control update and delete:
update=TRUEcauses an existing data source to be updated, if it exists; this option is by default
TRUEfor all database drivers, where the database is updated by adding a table.
st_writetry to open the the data source and delete the layer; no errors are given if the data source is not present, or the layer does not exist in the data source.
st_writeto delete the data source when present, before writing the layer in a newly created data source. No error is given when the data source does not exist. This option should be handled with care, as it may wipe complete directories or databases.
Read and write functions,
st_write(), can handle connections to spatial databases to read WKB or WKT directly without using GDAL. Although intended to use the DBI interface, current use and testing of these functions are limited to PostGIS.
Coordinate reference systems (CRS) are like measurement units for coordinates: they specify which location on Earth a particular coordinate pair refers to. We saw above that
sfc objects (geometry list-columns) have two attributes to store a CRS:
proj4string. This implies that all geometries in a geometry list-column must have the same CRS. Both may be
NA, e.g. in case the CRS is unknown, or when we work with local coordinate systems (e.g. inside a building, a body, or an abstract space).
proj4string is a generic, string-based description of a CRS, understood by the PROJ library. It defines projection types and (often) defines parameter values for particular projections, and hence can cover an infinite amount of different projections. This library (also used by GDAL) provides functions to convert or transform between different CRS.
epsg is the integer ID for a particular, known CRS that can be resolved into a
proj4string values can resolved back into their corresponding
epsg ID, but this does not always work.
The importance of having
epsg values stored with data besides
proj4string values is that the
epsg refers to particular, well-known CRS, whose parameters may change (improve) over time; fixing only the
proj4string may remove the possibility to benefit from such improvements, and limit some of the provenance of datasets, but may help reproducibility.
Coordinate reference system transformations can be carried out using
st_transform, e.g. converting longitudes/latitudes in NAD27 to web mercator (EPSG:3857) can be done by
sf objects and objects deriving from
sp) can be coerced both ways:
showMethods("coerce", classes = "sf") ## Function: coerce (package methods) ## from="Spatial", to="sf" ## from="sf", to="Spatial" methods(st_as_sf) ##  st_as_sf.SpatVector* st_as_sf.Spatial* st_as_sf.data.frame* ##  st_as_sf.lpp* st_as_sf.map* st_as_sf.owin* ##  st_as_sf.ppp* st_as_sf.psp* st_as_sf.s2_geography* ##  st_as_sf.sf* st_as_sf.sfc* ## see '?methods' for accessing help and source code methods(st_as_sfc) ##  st_as_sfc.SpatialLines* st_as_sfc.SpatialMultiPoints* ##  st_as_sfc.SpatialPixels* st_as_sfc.SpatialPoints* ##  st_as_sfc.SpatialPolygons* st_as_sfc.WKB* ##  st_as_sfc.bbox* st_as_sfc.blob* ##  st_as_sfc.character* st_as_sfc.dimensions* ##  st_as_sfc.factor* st_as_sfc.list* ##  st_as_sfc.map* st_as_sfc.owin* ##  st_as_sfc.pq_geometry* st_as_sfc.psp* ##  st_as_sfc.raw* st_as_sfc.s2_geography* ##  st_as_sfc.tess* ## see '?methods' for accessing help and source code # anticipate that sp::CRS will expand proj4strings: p4s <- "+proj=longlat +datum=NAD27 +no_defs +ellps=clrk66 +nadgrids=@conus,@alaska,@ntv2_0.gsb,@ntv1_can.dat" st_crs(nc) <- p4s # anticipate geometry column name changes: names(nc) = "geometry" attr(nc, "sf_column") = "geometry" nc.sp <- as(nc, "Spatial") class(nc.sp) ##  "SpatialPolygonsDataFrame" ## attr(,"package") ##  "sp" nc2 <- st_as_sf(nc.sp) all.equal(nc, nc2) ##  "Attributes: < Component \"class\": Lengths (4, 2) differ (string compare on first 2) >" ##  "Attributes: < Component \"class\": 1 string mismatch >" ##  "Component \"geometry\": Attributes: < Component \"crs\": Component \"input\": 1 string mismatch >" ##  "Component \"geometry\": Attributes: < Component \"crs\": Component \"wkt\": 1 string mismatch >"
Spatial* objects only support
POLYGON geometries are automatically coerced into their
MULTI form. When converting
sf, if all geometries consist of a single
POLYGON (possibly with holes), a
POLYGON and otherwise all geometries are returned as
MULTIPOLYGON: a mix of
MULTIPOLYGON (such as common in shapefiles) is not created. Argument
forceMulti=TRUE will override this, and create
MULTIPOLYGONs in all cases. For
LINES the situation is identical.
The standard for simple feature access defines a number of geometrical operations.
st_is_simple return a boolean indicating whether a geometry is valid or simple.
st_distance returns a dense numeric matrix with distances between geometries.
st_relate returns a character matrix with the DE9-IM values for each pair of geometries:
x = st_transform(nc, 32119) st_distance(x[c(1,4,22),], x[c(1, 33,55,56),]) ## Units: [m] ## [,1] [,2] [,3] [,4] ## [1,] 0.00 312184.9 128341.85 475623.3 ## [2,] 440561.15 114939.7 590434.80 0.0 ## [3,] 18944.03 352719.1 78756.89 517527.8 st_relate(nc[1:5,], nc[1:4,]) ## although coordinates are longitude/latitude, st_relate assumes that they are planar ## [,1] [,2] [,3] [,4] ## [1,] "2FFF1FFF2" "FF2F11212" "FF2FF1212" "FF2FF1212" ## [2,] "FF2F11212" "2FFF1FFF2" "FF2F11212" "FF2FF1212" ## [3,] "FF2FF1212" "FF2F11212" "2FFF1FFF2" "FF2FF1212" ## [4,] "FF2FF1212" "FF2FF1212" "FF2FF1212" "2FFF1FFF2" ## [5,] "FF2FF1212" "FF2FF1212" "FF2FF1212" "FF2FF1212"
st_is_within_distance return a sparse matrix with matching (TRUE) indexes, or a full logical matrix:
st_intersects(nc[1:5,], nc[1:4,]) ## Sparse geometry binary predicate list of length 5, where the predicate ## was `intersects' ## 1: 1, 2 ## 2: 1, 2, 3 ## 3: 2, 3 ## 4: 4 ## 5: (empty) st_intersects(nc[1:5,], nc[1:4,], sparse = FALSE) ## [,1] [,2] [,3] [,4] ## [1,] TRUE TRUE FALSE FALSE ## [2,] TRUE TRUE TRUE FALSE ## [3,] FALSE TRUE TRUE FALSE ## [4,] FALSE FALSE FALSE TRUE ## [5,] FALSE FALSE FALSE FALSE
st_union return new geometries, e.g.:
st_sym_difference return new geometries that are a function of pairs of geometries:
The following code shows how computing an intersection between two polygons may yield a
GEOMETRYCOLLECTION with a point, line and polygon:
opar <- par(mfrow = c(1, 2)) a <- st_polygon(list(cbind(c(0,0,7.5,7.5,0),c(0,-1,-1,0,0)))) b <- st_polygon(list(cbind(c(0,1,2,3,4,5,6,7,7,0),c(1,0,.5,0,0,0.5,-0.5,-0.5,1,1)))) plot(a, ylim = c(-1,1)) title("intersecting two polygons:") plot(b, add = TRUE, border = 'red') (i <- st_intersection(a,b)) ## GEOMETRYCOLLECTION (POLYGON ((7 -0.5, 6 -0.5, 5.5 0, 7 0, 7 -0.5)), LINESTRING (4 0, 3 0), POINT (1 0)) plot(a, ylim = c(-1,1)) title("GEOMETRYCOLLECTION") plot(b, add = TRUE, border = 'red') plot(i, add = TRUE, col = 'green', lwd = 2)
Non-simple geometries are for instance self-intersecting lines (left); non-valid geometries are for instance polygons with slivers (middle) or self-intersections (right).
Where possible geometric operations such as
st_area() report results with a units attribute appropriate for the CRS:
The units package can be used to convert between units:
The result can be stripped of their attributes if needs be:
(This will eventually be the topic of a new vignette; now here to explain the last attribute of
The standard documents about simple features are very detailed about the geometric aspects of features, but say nearly nothing about attributes, except that their values should be understood in another reference system (their units of measurement, e.g. as implemented in the package units). But there is more to it. For variables like air temperature, interpolation usually makes sense, for others like human body temperature it doesn’t. The difference is that air temperature is a field, which continues between sensors, where body temperature is an object property that doesn’t extend beyond the body – in spatial statistics bodies would be called a point pattern, their temperature the point marks. For geometries that have a non-zero size (positive length or area), attribute values may refer to the every sub-geometry (every point), or may summarize the geometry. For example, a state’s population density summarizes the whole state, and is not a meaningful estimate of population density for a give point inside the state without the context of the state. On the other hand, land use or geological maps give polygons with constant land use or geology, every point inside the polygon is of that class. Some properties are spatially extensive, meaning that attributes would summed up when two geometries are merged: population is an example. Other properties are spatially intensive, and should be averaged, with population density the example.
Simple feature objects of class
sf have an agr attribute that points to the attribute-geometry-relationship, how attributes relate to their geometry. It can be defined at creation time:
nc <- st_read(system.file("shape/nc.shp", package="sf"), agr = c(AREA = "aggregate", PERIMETER = "aggregate", CNTY_ = "identity", CNTY_ID = "identity", NAME = "identity", FIPS = "identity", FIPSNO = "identity", CRESS_ID = "identity", BIR74 = "aggregate", SID74 = "aggregate", NWBIR74 = "aggregate", BIR79 = "aggregate", SID79 = "aggregate", NWBIR79 = "aggregate")) ## Reading layer `nc' from data source ## `/tmp/RtmpYZf9Mh/Rinst6f5476aaf80e/sf/shape/nc.shp' using driver `ESRI Shapefile' ## Simple feature collection with 100 features and 14 fields ## Attribute-geometry relationship: 0 constant, 8 aggregate, 6 identity ## Geometry type: MULTIPOLYGON ## Dimension: XY ## Bounding box: xmin: -84.32385 ymin: 33.88199 xmax: -75.45698 ymax: 36.58965 ## Geodetic CRS: NAD27 st_agr(nc) ## AREA PERIMETER CNTY_ CNTY_ID NAME FIPS FIPSNO CRESS_ID ## aggregate aggregate identity identity identity identity identity identity ## BIR74 SID74 NWBIR74 BIR79 SID79 NWBIR79 ## aggregate aggregate aggregate aggregate aggregate aggregate ## Levels: constant aggregate identity data(meuse, package = "sp") meuse_sf <- st_as_sf(meuse, coords = c("x", "y"), crs = 28992, agr = "constant") st_agr(meuse_sf) ## cadmium copper lead zinc elev dist om ffreq ## constant constant constant constant constant constant constant constant ## soil lime landuse dist.m ## constant constant constant constant ## Levels: constant aggregate identity
When not specified, this field is filled with
NA values, but if non-
NA, it has one of three possibilities
|constant||a variable that has a constant value at every location over a spatial extent; examples: soil type, climate zone, land use|
|aggregate||values are summary values (aggregates) over the geometry, e.g. population density, dominant land use|
|identity||values identify the geometry: they refer to (the whole of) this and only this geometry|
With this information (still to be done) we can for instance
relation_to_geometryto constant in case it was identity.