`library(admix)`

We remind that a random variable \(X\) following an admixture distribution has cumulative distribution function (cdf) \(L\) given by \[L(x) = pF(x) + (1-p)G(x), \qquad x \in \mathbb{R},\] where \(G\) is a mixture component whose distribution is perfectly known, whereas \(p\) and \(F\) are unknown.\ In this setting, if no parametric assumption is made on the unknown component distribution \(F\), the mixture is considered as a semiparametric mixture. For an overview on semiparametric extensions of finite mixture models, see (Xiang and Yang 2018).

The mixture weight \(p\) of the unknown component distribution can be estimated using diverse techniques depending on the assumptions made on the unknown cdf \(F\), among which the ones discussed in the sequel:

- the estimator provided by Bordes and Vandekerkhove, see (L. Bordes and Vandekerkhove 2010);
- the estimator provided by Patra and Sen, (Patra and Sen 2016);
- the estimator provided by Inversion - Best Matching method, (Milhaud and Vandekerkhove 2021).

All the estimation methods presented hereafter can be performed using one single generic function for estimation with appropriate arguments, the so-called \(admix_estim\) function.

Many works studied the estimation of the unknown proportion in two-component admixture models. Among them, seminal papers are (D. Bordes L. and Vandekerkhove 2006) and (S. Bordes L. Mottelet and Vandekerkhove 2006). These papers are closely connected to the paper by (L. Bordes and Vandekerkhove 2010), where an asymptotic normal estimator is provided for the unknown component weight.

In this case, we use the Bordes and Vandekerkhove estimator, see (L. Bordes and Vandekerkhove 2010).

```
## Simulate data:
<- list(f = 'norm', g = 'norm')
list.comp <- list(f = list(mean = 3, sd = 0.5), g = list(mean = 0, sd = 1))
list.param <- rsimmix(n = 800, unknownComp_weight = 0.7, list.comp, list.param)[['mixt.data']]
data1 ## Perform the estimation of parameters in real-life:
<- list(f = NULL, g = 'norm')
list.comp <- list(f = NULL, g = list(mean = 0, sd = 1))
list.param BVdk_estimParam(data1, method = 'L-BFGS-B', list.comp, list.param)
#> [1] 0.6921441 2.9753939
```

Here we look at the first listed parameter, which corresponds to the estimate of the unknown component weight.

In this case, we use the Patra and Sen estimator, see (Patra and Sen 2016).

```
## Simulate data:
<- list(f = 'norm', g = 'norm')
list.comp <- list(f = list(mean = 3, sd = 0.5), g = list(mean = 0, sd = 1))
list.param <- rsimmix(n = 1000, unknownComp_weight = 0.6, list.comp, list.param)[['mixt.data']]
data1 ## Transform the known component of the admixture model into a Uniform(O,1) distribution:
<- list(f = NULL, g = 'norm')
list.comp <- list(f = NULL, g = list(mean = 0, sd = 1))
list.param <- knownComp_to_uniform(data = data1, comp.dist=list.comp, comp.param=list.param)
data1_transfo PatraSen_est_mix_model(data = data1_transfo, method = 'fixed',
c.n = 0.1*log(log(length(data1_transfo))), gridsize = 1000)$alp.hat
#> [1] 0.605
```

In the two-sample setting, the idea is to use the Inversion - Best Matching (IBM) approach. The IBM method sensures asymptotically normal estimators of the unknown quantities, which will be very useful in a testing perspective. However, it is important to note that such estimators are mostly biased when \(F_1 \neq F_2\), and general one-sample estimation strategies such as (Patra and Sen 2016) or (L. Bordes and Vandekerkhove 2010) may be preferred to estimate the unknown component proportion in general settings (despite that this is much more time-consuming). In the latter case, one performs twice the estimation method, on each of the two samples under study.

When we are under the null, Milhaud and Vandekerkhove (2021) show that the estimatorsis consistent towards the true parameter values.

```
## Simulate data:
<- list(f1 = 'norm', g1 = 'norm',
list.comp f2 = 'norm', g2 = 'norm')
<- list(f1 = list(mean = 3, sd = 0.5), g1 = list(mean = 0, sd = 1),
list.param f2 = list(mean = 3, sd = 0.5), g2 = list(mean = 5, sd = 2))
<- rsimmix(n=1700, unknownComp_weight=0.5, comp.dist = list(list.comp$f1,list.comp$g1),
sample1 comp.param=list(list.param$f1,list.param$g1))
<- rsimmix(n=1500, unknownComp_weight=0.7, comp.dist = list(list.comp$f2,list.comp$g2),
sample2 comp.param=list(list.param$f2,list.param$g2))
##### On a real-life example (unknown component densities, unknown mixture weights).
<- list(f1 = NULL, g1 = 'norm',
list.comp f2 = NULL, g2 = 'norm')
<- list(f1 = NULL, g1 = list(mean = 0, sd = 1),
list.param f2 = NULL, g2 = list(mean = 5, sd = 2))
## Estimate the mixture weights of the two admixture models (provide only hat(theta)_n):
<- IBM_estimProp(sample1 = sample1[['mixt.data']], sample2 = sample2[['mixt.data']],
estim known.prop = NULL, comp.dist = list.comp, comp.param = list.param,
with.correction = FALSE, n.integ = 1000)
'prop.estim']]
estim[[#> [1] 0.4992917 0.6872570
```

Indeed, the two unknown proportions were consistently estimated.

Estimators are consistent under \(H_1\), although they can be (strongly) biased as compared to their true values.

```
## Simulate data:
<- list(f1 = 'norm', g1 = 'norm',
list.comp f2 = 'norm', g2 = 'norm')
<- list(f1 = list(mean = 1, sd = 0.5), g1 = list(mean = 0, sd = 1),
list.param f2 = list(mean = 3, sd = 0.5), g2 = list(mean = 5, sd = 2))
<- rsimmix(n=1700, unknownComp_weight=0.5, comp.dist = list(list.comp$f1,list.comp$g1),
sample1 comp.param=list(list.param$f1,list.param$g1))
<- rsimmix(n=1500, unknownComp_weight=0.7, comp.dist = list(list.comp$f2,list.comp$g2),
sample2 comp.param=list(list.param$f2,list.param$g2))
##### On a real-life example (unknown component densities, unknown mixture weights).
<- list(f1 = NULL, g1 = 'norm',
list.comp f2 = NULL, g2 = 'norm')
<- list(f1 = NULL, g1 = list(mean = 0, sd = 1),
list.param f2 = NULL, g2 = list(mean = 5, sd = 2))
## Estimate the mixture weights of the two admixture models (provide only hat(theta)_n):
<- IBM_estimProp(sample1 = sample1[['mixt.data']], sample2 = sample2[['mixt.data']],
estim known.prop = NULL, comp.dist = list.comp, comp.param = list.param,
with.correction = FALSE, n.integ = 1000)
'prop.estim']]
estim[[#> [1] 0.3302282 0.4940497
```

Concerning the unknown cdf \(F\), one usually estimate it thanks to the inversion formula \[F(x) = \dfrac{L(x) - (1-p)G(x)}{p},\] once \(p\) has been consistenly estimated.

This is what is commonly called the decontaminated density of the unknown component. In the following, we propose to compare the two decontaminated densities obtained once the unknown quantities have been consistently estimated by the IBM approach. Note that we are under the null (\(F_1=F_2\)), and thus that the decontaminated densities should look similar.

```
## Simulate data:
<- list(f1 = 'norm', g1 = 'norm',
list.comp f2 = 'norm', g2 = 'norm')
<- list(f1 = list(mean = 3, sd = 0.5), g1 = list(mean = 0, sd = 1),
list.param f2 = list(mean = 3, sd = 0.5), g2 = list(mean = 5, sd = 2))
<- rsimmix(n=1700, unknownComp_weight=0.5, comp.dist = list(list.comp$f1,list.comp$g1),
sample1 comp.param=list(list.param$f1,list.param$g1))
<- rsimmix(n=1500, unknownComp_weight=0.7, comp.dist = list(list.comp$f2,list.comp$g2),
sample2 comp.param=list(list.param$f2,list.param$g2))
## Estimate the mixture weight in each of the sample in real-life setting:
<- list(f1 = NULL, g1 = 'norm',
list.comp f2 = NULL, g2 = 'norm')
<- list(f1 = NULL, g1 = list(mean = 0, sd = 1),
list.param f2 = NULL, g2 = list(mean = 5, sd = 2))
<- IBM_estimProp(sample1[['mixt.data']], sample2[['mixt.data']], comp.dist = list.comp,
estimate comp.param = list.param, with.correction = FALSE, n.integ = 1000)
## Determine the decontaminated version of the unknown density by inversion:
<- decontamin_density_unknownComp(sample1 = sample1[['mixt.data']],
res1 comp.dist = list.comp[1:2], comp.param = list.param[1:2],
estim.p = estimate$prop.estim[1])
<- decontamin_density_unknownComp(sample1 = sample2[['mixt.data']],
res2 comp.dist = list.comp[3:4], comp.param = list.param[3:4],
estim.p = estimate$prop.estim[2])
plot_decontamin_density(x_val = seq(from=-1,to=6,length.out=40), decontamin_obj = res1, add_plot = FALSE)
plot_decontamin_density(x_val = seq(from=-1,to=6,length.out=40), decontamin_obj = res2, add_plot = TRUE)
```

Bordes, Delmas, L., and P. Vandekerkhove. 2006. “Semiparametric Estimation of a Two-Component Mixture Model When a Component Is Known.” *Scandinavian Journal of Statistics* 33: 733–52.

Bordes, L., and P. Vandekerkhove. 2010. “Semiparametric Two-Component Mixture Model When a Component Is Known: An Asymptotically Normal Estimator.” *Mathematical Methods of Statistics* 19: 22–41.

Bordes, S., L. Mottelet, and P. Vandekerkhove. 2006. “Semiparametric Estimation of a Two Components Mixture Model.” *Annals of Statistics* 34: 1204–32.

Milhaud, Pommeret, X., and P. Vandekerkhove. 2021. “Shape Constraint Free Two-Sample Contamination Model Testing.” https://hal.archives-ouvertes.fr/hal-03201760.

Patra, R. K., and B. Sen. 2016. “Estimation of a Two-Component Mixture Model with Applications to Multiple Testing.” *Journal of the Royal Statistical Society, Series B* 78: 869–93.

Xiang, Yao, S., and G. Yang. 2018. “An Overview of Semiparametric Extensions of Finite Mixture Models.” *Statistica Scinica* 34: 391–404.